Opening Screen Customization

Opening Screen

You can set a BMP image that is stored on USB Flash Drive as the opening screen.

This is setting requires the following image format, folder name and file name.

Usable file format:

• BMP image
• Image size: 800 x 480 pixels (RBG 24 bit or less/number of color bit: 24, 8, 1 bit)
• Compression format: non-compressed
• Folder name*1:  OPENINGFILE
• File name*2: openingfile.bmp

1 Connect the USB flash drive to the USB extension cable.

A message confirming the opening screen change is displayed.

2 Touch [OK]

An Update indicator is displayed, an update for the opening screen starts.

3 After the update is complete, the following message is displayed. *3

"The logo has  been updated successfully! Please remove USB memory and press OK."

4 After removing the USB flash drive, touch [OK]

The opening screen settings is complete.

1. * Be sure to save the folder to the first layer of the USB flash drive.
2. * Only one BMP image can be set as the opening screen
3. * If "Customization failed," is displayed, touch [OK] and then check that the folder name, file name and format are correct.

• Do not perform the following action during the update
  • Do not turn off the ACC to the car.
  • Do not unplug the USB flash drive
  • Do not turn off or operate the unit
• To return to the opening screen to its original image, you MUST Clear All Settings. Be careful of this operation, as your other settings are also initialized. For details, see "Initializing the System" (page 41)

Supported Product:

X110, X108U, X208U, INE-W967HD, INE-W977HD, iLX-207, iLX-F309, X109-WRA, X209-WRA, i209-WRA, i209-GM, i207-WRA, X409-WRA-JK, X409-WRA-JL